New - the Tromm in-wall receiver for remote control of your blinds, screens and shutters


With a built-in receiver you can control your roller shutters and screens from a distance.

We have sold many thousands of the Somfy version and now have an alternative that is cheaper and has surprising advantages.

You can read all about it below. If you don't have time to read all the details, here's the summary.





- Much cheaper - 44.95 each incl. VAT, lowest price - 39.95 if you buy 10 at once

- Can also be connected to a solar and solar-wind sensor, which makes it perfect to use in combination with screens and blinds

- Automatic ventilation setting of 20%, easy to call up via remote control

- Within 10 seconds you have linked the transmitter and you can operate your roll-down shutter or screen

- Can be connected to any brand of motor, as long as it is operated with a switch



There is no app available, so it can only be connected to a remote control, sensor and time control


Click here to go directly to the Tromm built-in receiver




Of course you can control your shutters to the endpoints, so fully open and fully closed.

With one push on the button, the shutter rolls to these positions.

But more is  possible


Ventilation mode


Do you want to ventilate the room, then the ventilation mode is very handy.

By pressing 2 buttons on the remote control, the roller shutter rolls up to 20% open.

The built-in receiver determines this position automatically for you, so programming is not necessary.


Favourite position


Would you like an intermediate position which you determine yourself? That's possible too.

You set it at a desired point and then call it up with a combination of two buttons on the remote control.

You can choose from a number of options for the remote controls.


Remote controls and sensors


For the remote controls, we have the well-known models, such as a 1-channel, a 3-channel and a 6-channel transmitter.

You can link 1 or more receivers to these, so that you can control individual receivers or groups of receivers.


If you want your roll-down shutters or screens to open and close automatically, you can connect a time control.

This costs €99.95 and can be found here.

An additional advantage is that this time control has 6 channels and you can therefore control multiple receivers separately.


If you use the built-in receivers for your sun blinds or screens, the sun/wind and wind sensors are very handy.

They make sure that screens are automatically lowered when there is too much sun.

If the wind blows too hard, the screens will roll up, to prevent damage.


You can connect up to 30 transmitters, of which 3 sensors.


Technical information and installation


Dimensions: 47 x 32 x 18 mm

Weight: 30 grams



Installation is easy and you'll have the transmitter paired within 20 seconds, which means you'll be up and running in no time.


Click here to order the receiver.

If you have any questions or would like more information, please send an e-mail to