
An Orea RTS motor that comes straight out of the box, needs to be programmed.
This means that:
- A remote control will be linked
- The roll out direction will be set
- End limits will be programmed
This ensures that the motor rolls in the right direction and stops at the right position.
As an Orea motor can not have the upper limit set in manual mode, the motor is only suitable for cassette awnings.
It also means that the standard way of programming an RTS motor does not apply.
Here are the steps you need to take:
(watch the video below or read the steps in text below the video):
- Make sure the motor is installed and has power
- Take your RTS remote control (in the video, a Smoove origin RTS is used) and press up and down at the same time
- Press up or down shortly to check whether the motor rolls in the right direction (you want the down button to make the awning roll out)
- If it doesn't roll in the right direction, press and hold the My or stop button until the motor jogs
- Now, make sure the motor is in the upper position
- Next, press My and down at the same time to make the motor roll out.
- Release the buttons as soon as the motor starts rolling
- Press the stop button when the awning has arrived in the right position
- Now, you can still adjust by briefly pressing up or down
- Once you're satisfied with the roll-out position, press my and up at the same time and hold until the motor start rolling up
- You can now wait until the awning is fully rolled up and closed. The motor will stop rolling automatically when it hits the case
- Press and hold the My or stop button until the motor jogs
- Finalise the procedure by turning over the remote control and pressing and holding the program button until the motor jogs
That's it
If it doesn't work, or you need more help, you can contact us at info@tromm.com