It's always possible that a reset of your Somfy motor is required.

The regular 3-8-3 procedure is not going to work with 12V / battery operated motors.

So how do you reset one of these motors?

 

Let's look at how you can reset the Tilt & lift 25 RTS

If you prefer to see the step-by-step video, you can watch it below.

Alternatively, you can read the full instructions below the video

 

 

So, the steps are as follows:

 

  1. Make sure the motor has power
  2. Press the prog button on the motor and hold it for about 10 seconds
  3. In these 10 seconds, the motor will jog 3 times
  4. The reset is complete after the third jog.

Once the reset is done, the motor is back in its factory settings and can be re-programmed

If you need any additional information, you can contact us at info@tromm.com