Somfy Oximo 40 IO 4/16
This Oximo 40 IO motor is especially suitable for shafts of 40mm. The motor is controllable with an IO remote control and has the advantage that feedback is possible when using the TaHoma Switch app control. So you always know where your roller shutter 'stands'.
- Tube motor 230 V/50 Hz, with built-in high-frequency receiver.
- Reception range: 20 meters through 2 concrete walls, can be doubled by means of a repeater.
- Easy wireless remote control adjustment.
- Automatic intermediate position pre-programmed as standard.
- One Oximo io tubular motor can be operated wirelessly with up to 9 1-way controls and an unlimited number of 2-way controls. These are easy to add and remove.
- Not applicable with relay boxes, standard switches and controls.
- Fits into a pipe with a minimum inside diameter of 37 mm.
- Capacity of final adjustment: operation time limited to 3 min.
- Standard supplied with a white 2-core (VVF) cord, length 3 m. Axial and radial cord output.
- Not suitable for continuous operation.
- Frost protection works only with closed slats. If the roller shutter becomes frozen with open slats (ventilation), this will not be detected by the motor.
Applications: Roller Shutter
Number of channels: 9
Radio frequency: io 868 MHz
Range in the house: 20 m
Range in open space: 200 m
Power supply: AC - RGE 1 - 230V/50HZ
Speed: 16 rpm
Approvals: CE, NF, VDE
Insulation class: II
Protection index: IP 44
Diameter: 40 mm
Minimum inside diameter: 47 mm
Range: OXIMO
Rated torque: 4 Nm
Advantages:
Feedback commands during installation: you can see from the shutter exactly what is happening.
Parallel connection of supply cables: less cable work makes installation easier.
Automatic adjustment upper end point: always a maximum open shutter and quick adjustment.
Automatic adjustment lower end point: quick adjustment and always a perfectly closed shutter.
Fixed upper and/or lower end point: no pulling force is applied or the armor, necessary when no stopper is installed.
Direction of rotation can be adjusted without reset: the endpoints do not have to be cleared to adjust the direction of rotation.
Setting or resetting the motor via the Set&Go io and/or Pro app: overview of all relevant information and possibilities at a glance and reset without disconnecting the power cables.
Using the Help me app: free app with all adjustments, easily explained and available offline.
Type: Motors
Integrated technology: io
| Motor speed (rotations per minute) | 16 |
|---|---|
| Item number | 1030116 |
| Motor cable length | 3 |
| Nm | 4 |