Oximo 50 RTS 40/17
Wirelessly operated shutter motor with a tensile force of 160 kg (for a 50 mm diameter tube)
Advantages:
- Obstacle detection for the protection of your roller shutter and belongings
- Protection against damage caused by freezing of the roller shutter
- Intermediate position easy to program and recall with the "My" button on the remote control
You can choose from a standard motor or a pre-programmed motor. The great advantage of a pre-programmed motor is that you can be sure the motor will work and only need to adjust the end points. Click here for more information about pre-programmed motors.
The cost for pre-programming is € 9.95. From 6 motors and up this is free, mail us for a custom quote.
Click below if you want to use a preprogrammed motor.
Further features of the Oximo 50 RTS motor are:
- Large reception range of up to 20 meters through 2 concrete walls
- Adjustable in time by using an RTS time control (accessory)
- The automatic intermediate position is already pre-programmed on the daylight setting
Further technical details of interest:
- 1 Oximo motor can be controlled by a maximum of 12 wireless control points
- Minimum tube diameter must be 47 mm
- Capacity of the final adjustment: 200 revolutions with a maximum running time of 3 minutes
- Standard delivered with a white 3-wire (VVF) cord with a length of 3 meters
- Not suitable for continuous use
trekkracht motor | 160 kg bij 50 mm diameter buis, 135 kg bij 60 mm en 116 kg bij 70 mm |
---|---|
Motor speed (rotations per minute) | 17 |
voeding motor | 230 V |
Lengte motor | 745 mm |
motor vermogen | 270 W |
Werkingstijg motor | 4 minuten |
Max aantal omwentelingen motor | 200 |
Motor cable length | 5 meter |
Aantal draden motorkabel | 3 |