Oximo 50 IO 40/17
Somfy Oximo IO motor with 160 kg traction force.
You can choose from a standard motor or a pre-programmed motor. The big advantage of a pre-programmed motor is that you know for sure that the motor will work and only need to adjust the end points. Click here for more information about pre-programmed motors.
The cost for pre-programming is € 9.95. From 6 motors and up this is free, mail us for a custom quote.
Click below if you want to use a preprogrammed motor.
Somfy Oximo IO motor with 160 kg traction force.
Oximo 50 io series for roller shutters
- Tubular motor 230 V/50 Hz, with built-in high-frequency receiver.
- Reception range: 20 meters through 2 concrete walls, can be doubled with a repeater.
- Easy wireless adjustment by remote control.
- Can be combined with a wireless timer (Impresario Chronis io).
- Automatic intermediate position pre-programmed as standard on the daylight position.
- One Oximo io tubular motor can be operated wirelessly with up to 9 1-way controls and an infinite number of 2-way controls.
- Not applicable with relay boxes, standard switches and standard controls.
- Fits into a pipe with a minimum inside diameter of 47 mm.
- Capacity of final adjustment: 136 revolutions. Operating time limited to 3 min.
- Standard supplied with a white 3-wire (VVF) cord, length 5 m. Axial and radial cord output.
- Not suitable for continuous use.
Motor speed (rotations per minute) | 17 |
---|---|
Item number | 1 049 607 |
Motor cable length | 3 |
Nm | 40 |