Oximo 50 IO 6/17
Tubular motor with a traction force of 24 kg
You can choose between a standard motor or a pre-programmed motor. The big advantage of a pre-programmed motor is that you know for sure that the motor will work and you only have to adjust the end points. Click here for more information about pre-programmed motors.
The cost for pre-programming is € 14.95. From 6 motors and up this is free, mail us for a custom quote.
Click below if you want to use a preprogrammed motor.
€181.95
Calculating delivery date...
Browse to
Details
Tubular motor with a tensile force of 24 kg
Oximo 50 io series for roller shutters
- Tubular motor 230 V/50 Hz, with built-in high-frequency receiver.
- Reception range: 20 meters through 2 concrete walls, can be doubled with a repeater.
- Easy wireless adjustment by remote control.
- Can be combined with a wireless timer (Impresario Chronis io).
- Automatic intermediate position pre-programmed as standard on the daylight position.
- One Oximo io tubular motor can be operated wirelessly with up to 9 1-way controls and an infinite number of 2-way controls.
- Not applicable with relay boxes, standard switches and standard controls.
- Fits into a pipe with a minimum inside diameter of 47 mm.
- Capacity of final adjustment: 136 revolutions. Operating time limited to 3 min.
- Standard supplied with a white 3-wire (VVF) cord, length 3 m. Axial and radial cord output.
- Not suitable for continuous use.
More Information
| Motor speed (rotations per minute) | 6 |
|---|---|
| Item number | 1 032 701 |
| Motor cable length | 3 |
| Nm | 6 |
Reviews
Write Your Own Review
Oximo 50 IO 6/17
