Oximo 50 RTS 30/17
Wirelessly operated shutter motor with a tensile force of 120 kg (for a 50 mm diameter tube)
- Obstacle detection for the protection of your roller shutter and belongings
- Protection against damage caused by freezing of the roller shutter
- Intermediate position easy to program and recall with the "My" button on the remote control
You can choose from a standard motor or a pre-programmed motor. The great advantage of a pre-programmed motor is that you can be sure the motor will work and only need to adjust the end points. Click here for more information about pre-programmed motors.
The cost for pre-programming is € 9.95. From 6 motors and up this is free, mail us for a custom quote.
Click below if you want to use a preprogrammed motor.
Further features of the Oximo 50 RTS motor are:
- Large reception range of up to 20 meters through 2 concrete walls
- Adjustable in time by using an RTS time control (accessory)
- The automatic intermediate position is already pre-programmed on the daylight setting
Further technical details of interest:
- 1 Oximo motor can be controlled by a maximum of 12 wireless control points
- Minimum tube diameter must be 47 mm
- Capacity of the final adjustment: 200 revolutions with a maximum running time of 3 minutes
- Standard delivered with a white 3-wire (VVF) cord with a length of 3 meters
- Not suitable for continuous use
- If you're looking for a cheaper alternative, you can swerve to the Volte 30/17. This is fully compatible with the Somfy series. However, the motor cable cannot be disconnected from the motor tube and the motor does not have obstacle detection. Look here for all the details of the Volte 30/17.
|trekkracht motor||120 kg bij 50 mm diameter buis, 101 kg bij 60 mm en 87 kg bij 70 mm|
|Motor speed (rotations per minute)||17|
|voeding motor||230 V|
|Lengte motor||675 mm|
|motor vermogen||240 W|
|Werkingstijg motor||3 minuten|
|Max aantal omwentelingen motor||200|
|Motor cable length||5 meter|
|Aantal draden motorkabel||3|