Somfy RTS built-in receiver for roller shutters
This receiver is simply placed behind the existing switch. This is very handy, because it means that you can continue to operate your roller shutter using the existing switch, but also remotely with a separate remote control or via your smartphone (you will need the Tahoma as well).
Note: You do need an RTS remote control to adjust the switch.
It fits in a flush-mounting box with a depth of 50 mm.The dimensions are 45 wide x 41 long x 19 mm thick.
Tip: The built-in receiver for roller shutters from Somfy is quite pricey. We have a cheaper alternative (prices start at € 39.95) which is just as good: The Tromm built-in receiver. With this receiver you can also control a switch motor with a remote control. This is not expandable with an app control. Click on the link to view the Tromm built-in receiver.
- To control 1 roller shutter up/down with an RTS controller.
- Ideal for renovations.
- Can be mounted behind the switch in the flush-mounting box.
- The existing switch remains intact.
- Group or central operation via RTS hand transmitter or RTS clock.
- Fits into a flush-mounting box of 50 mm depth.
- Suitable for use with remote control and regular switch.
Tip: The built-in receiver for roller shutters from Somfy is quite pricey. We have a cheaper alternative (prices start at € 39.95) which is just as good: The Tromm built-in receiver. With this receiver you can also control a switch motor with a remote control. This is not expandable with an app control. Click on the link to view the Tromm built-in receiver.
