Elero RolMotion M10 868 SH

(0 reviews)

Elero's RolMotion is a super quiet motor that features a mesh network function, provides feedback and is controllable by remote control.

You can choose from a standard motor or a pre-programmed motor. The big advantage of a pre-programmed motor is that you are sure that the motor works and you only have to adjust the endpoints. Click here for more information about preprogrammed motors.
The costs for preprogramming are € 9.95. From 6 motors it is free, mail us for a customized quote

Click below if you want to use a pre-programmed motor.

Customizable Options:

minus plus
  • Buy 2 for €190.95 each and save 3%
  • Buy 6 for €185.95 each and save 5%
Calculating delivery date...
Kom je er niet uit?
Ma-vr van 9.00 tot 16.00
Neem contact met ons op
Browse to

The RolMotion from Elero is a super quiet motor that is equipped with a mesh network function, gives feedback and can be operated with a remote control. In addition, the motor has a very attractive price and a warranty of no less than 7 years.

A mesh network function means that the motors can send the signal from the remote control to each other. This means that you can press the "up" or "down" button on your remote control from anywhere in your house and all the motors will just listen.

Tensile force The motor is available in a 10 Nm and a 20 Nm pulling force. Special is that the motor itself measures how much power it needs. So with this engine it is no problem if you take it a little too strong. He will measure how much power he needs and so you get no problems with the obstacle detection and the protection against freezing. In addition, it has a soft brake which gives extra protection to the shutter

Super quiet The motor is very quiet, and you can compare it to the RS100 IO from Somfy.

Adapter set: The RolMotion is suitable for shafts from 50 mm in diameter, but with the right adapter set you can also use it in 8k60 and 8k70 shafts. Because the 8k60 axles are the most common, we supply a standard 8k60 adapter set.
If you want another adapterset you can k
if you want another adapter set you can switch to another one free of charge, but you have to let us know when you order. Then we ensure that immediately the right is delivered with your order.

Engine mount: The engine head of the RolMotions is a SH version. That stands for Star Headand means that it is compatible with Somfy motor mounts.This means that you can perfectly use the RolMotion as a replacement for a worn out Somfy motor. This will not cost you any extra work, because the motor fits perfectly in the support and you don't have to replace it to be able to provide your roller shutter with a silent motor. Attention! When you install a new motor, you still need a motor support. For this you can use Somfy series motor support.

Rotation speed is 14 revolutions per minute.

Do you doubt between the Somfy RS100 IO and the Elero RolMotion? The Somfy RS100 IO can be viewed here.

It is now also possible to buy a pre-programmed Rolmotion. In that case you only have to adjust the starting and ending point. Watch the video below. If you want to use this unique service please indicate it at extra options or send us an email: info@tromm.com


Pro's & cons
  • plus-circle super silent motor
  • plus-circle most economical choice
  • plus-circle compatible with Somfy motor support
  • minus-circle available up to a maximum torque of 20 Nm
More Information
Motor speed (rotations per minute) 14
Item number TROMM-963
Motor cable length 5
Nm 10
Kom je er niet uit?
Ma-vr van 9.00 tot 16.00
Neem contact met ons op