Altus 40 RTS 9/16
The Altus 9/16 is a wireless motor for 8K40 axles.With 9 Nm pulling power you can apply it in roller shutters with a maximum weight of 45 kg.
You can choose between a standard motor or a pre-programmed motor. The advantage of a pre-programmed motor is that you know for sure that the motor works and that you only have to adjust the endpoints. Click here costs are €9,95 per motor and from 6 motors onwards this is free. Mail us for a quote Click below if you want a preprogrammed motor.
The Altus 40 RTS is the only motor with wireless control integrated into the motor for narrow shafts.
This means that it does not have the functions of the Oximo, such as obstacle detection and protection against freezing (that did not fit in the motor anymore), but you do have a lot of advantages of the operation via RTS.
So you can set an intermediate position, which you can call via the "My" button.
But you can also go for full automation via the Tahoma system.
If you think a full automation is still a bit much, then you can choose from a range of controls with which you can already realize most of your wishes.
For example, there are time controls for automatic opening and closing of the roller shutter on time.
But you can also close your roller shutter when the sun gets too bright or it gets too hot in the room. You use the RTS sensors for that.
If you have several roller shutters, you simply use a multi-channel transmitter. This allows you to control a shutter individually, but also to create a group channel, so that with 1 push of a button everything opens or closes.
Motor speed (rotations per minute) | 16 |
---|---|
Item number | TROMM-192 |
Motor cable length | 5 |
Nm | 9 |