
Oximo RTS short 6/17 auto
This motor is basically the same as the other motors but is especially suitable for small shutters. The motor only has a length of 36.7 cm compared to 60.7 cm for the regular 6/17. In addition, the motor is fully automatically adjusted and not based on the end points as with the regular 6/17.
This motor is basically the same as the other motors but is especially suitable for small shutters. The motor only has a length of 36.7 cm compared to 60.7 cm for the regular 6/17. In addition, the motor is fully automatically adjusted and not based on the end points as with the regular 6/17.
Features
- Intelligent obstacle detection in both the up and down direction. Caution for rolling off the shutter blade in the shutter box.
- Motor blocks in case of obstacle or freezing.
- Automatic maintenance cycle (monthly with automatic adjustment of end points) which ensures that the shutter always opens and closes perfectly.
- Recommended wireless control:
- Chronis Comfort RTS wireless timer with/without light sensor.
- Sunis Indoor WireFree RTS autonomous sun sensor.
- Autonomous sun and temperature sensor Thermosunis WireFree RTS.
- Complete range of tubular motors, series 50: 6 Nm to 40 Nm.
- Quick installation through unique clip system.
- Only for private use.
- Compatible with the Sunis WireFree sensor RTS.
- Maximum benefit of all roller shutter advantages when using the mounting accessories (up to 20 Nm applicable).
- Quick and easy adjustment and operation with wireless RTS control point, e.g. Telis remote control.
- Feedback during programming operations (by moving end product).
- Flexible and multifunctional system: easy to add, move and remove wireless RTS control points.
- Minimum cabling required with multiple end products.
- Tubular motor 230 V/50 Hz, with built-in high-frequency receiver.
- Reception range: 20 meters through 2 concrete walls.
- Easy wireless adjustment by remote control.
- Possibility of combination with wireless timer (possibly with light sensor).
- Automatic intermediate position pre-programmed as standard on the daylight position.
- 1 Oximo RTS tubular motor can be operated with up to 12 wireless control points.
- Not applicable with relay boxes, standard switches and standard controllers.
- Fits into a tube with a minimum inner diameter of 47 mm.
- Capacity of final adjustment: 200 revolutions. Operating time limited to 4 min.
- Standard supplied with a white 3-core (VVF) cord, length 5 m. Axial and radial cord output.
- Not suitable for continuous use.