Elero's RolMotion is a super-quiet motor that features a mesh network function, provides feedback and is controllable by remote control. In addition, the motor has a very attractive price and a warranty of no less than 7 years.

Pulling power: The motor is available in a 10 Nm and a 20 Nm pulling power. What is special about this is that the motor itself measures how much force it needs. So with this motor it is not a problem if you take it a little too strong. It will measure by itself how much power it needs and so you won't have any problems with the obstacle detection and the protection against freezing. In addition, it has a soft brake which gives extra protection to the shutter.

Super quiet: The motor is very quiet, and you can compare it to the RS100 IO from Somfy.

Adapter set: The RolMotion is suitable for shafts from 50 mm in diameter, but with the right adapter set you can of course also use it in 8k60 and 8k70 shafts. Because the 8k60 axles are the most common, we supply an 8k60 adapter set as standard.
If you want a different adapter set, you can switch kcostless switch to another one, but you have to let us know when you order. Then we will make sure that the right one is delivered immediately with your order.

Motor mount: The motor mount of the RolMotions is a SH version. That stands for Star Headenmeans it is compatible with Somfy motor mounts.This allows you to use the RolMotion perfectly as a replacement for a worn out Somfy motor. This then doesn't cost you any extra work, because the motor fits perfectly in the support and you don't need to replace it to still be able to provide your roller shutter with a silent motor. Note! When you place a new motor you still need a motor support. So for this you can use Somfy series motor support.

Rotation speed is 14 revolutions per minute.

The video below shows the Elero RolMotion in detail.

Having doubts between the Somfy RS100 IO and the Elero RolMotion? Check out the video below. The Somfy RS100 IO can be viewed here.

It is now also possible to buy a pre-programmed Rolmotion from us. You then only need to adjust the start and end point. Watch the video below. Would you like to use this unique service, please indicate that under extra options or send us an email: info@tromm.com