Oximo 50 io series for roller shutters

This motor is basically the same as the other motors but is especially suitable for small roller shutters. The motor only has a length of 36.7 cm compared to 60.7 cm for the regular 6/17. In addition, the motor is fully automatically adjusted and not based on the end points as with the regular 6/17.

• Tubular motor 230 V/50 Hz, with built-in high-frequency receiver.
• Reception range: 20 meters through 2 concrete walls, can be doubled by means of a repeater.
• Easy wireless adjustment by remote control.
• Can be combined with a wireless timer (Impresario Chronis io).
• Automatic intermediate position pre-programmed as standard on the daylight position.
• One Oximo io tubular motor can be operated wirelessly with a maximum of 9 1-way controllers and an infinite number of 2-way controllers.
• Not applicable with relay boxes, standard switches and standard controls.
• Fits into a pipe with a minimum inside diameter of 47 mm.
• Capacity of final adjustment: 136 revolutions. Operating time limited to 3 min.
• Standard supplied with a white 3-wire (VVF) cord, length 5 m. Axial and radial cord output.
• Not suitable for continuous operation.
• Note: Short version for shutters from 425mm by using the short shaft prop and carriage.