Bearing with cushion mounted on the overlying side of the shaft (seen from the motor side of the shaft)

• Diameter 40 mm
• For 12 mm shaft

This bearing with cushion can be used for the axle grinders with 12 mm pin. All shaftscrews with pin that we offer on this site fit this bearing. The bearing has an outside diameter of 4 cm and is filled with steel balls, so it will last for years. The bearing cushion has a width of 8 cm. The center distance between the 2 upper screw holes is 57 mm. When the bearing is placed in the cushion, the total height is 62 mm