Replacing your roller shutter motors because you no longer want to control them with a switch but with a remote control is not necessary.

With this receiver (which you place behind a built-in switch) you can now operate your motors with a remote control.

You can also connect a wireless wind sensor / solar wind sensor to it That makes the Tromm receiver also suitable for awnings and screen motors.

Would you like to use the receiver to tilt your blinds with a remote control? That is also possible. Adjust the settings with a few presses and you control your blind remotely from now on (video on how to do that is available).

Handy is also that you can link a wireless 6-channel clock. This remote control lets you open and close the shutters / blinds at times set by you.

Further advantages:

• Recall the ventilation mode without programming. Press the appropriate buttons and the shutter automatically rolls open to 20%.
• Program an intermediate position, so that by 2 keys on the remote control you let the shutter run to your preferred position.
• Can also be linked as a receiver for a wired home automation system.

Technical details:

• weight: 30 grams
• dimensions: 47 x 18 x 32 mm
• maximum of 30 transmitters can be linked, including a maximum of 3 sensors
• IP classification: IP 20 - dustproof
• 3A maximum
• frequency: 433.92 MHz
• operating temperature: -20 Celsius to +55 Celsius
• maximum operation time: 240 seconds as factory setting, can be adjusted to maximum 650 seconds

Video In-depth look Tromm Built-in receiver:

Video Connecting first remote control to the Tromm receiver:

Video How to reset the built-in receiver: